AutoDome 600 Series Analog PTZ Camera
Installing the Roof Parapet and Pipe Mounts | en
47
Bosch Security Systems, Inc.
Installation Manual
F.01U.265.793 | 2.0 | 2012.02
5.
Insert the Parapet Pipe Arm into the mounting bracket until it bottoms in the bracket.
6.
Remove the End Cap from the front of the arm and feed the video, control, and power
wires up through the bottom of the pipe arm and out the front end.
Figure 3.7
VG4-A-9230 Parapet Mount
7.
Fold the video, control, and power wires back at the front end of the arm and route them
down and out through the Down Pipe. Then replace the End Cap.
8.
Wrap at least five layers of Teflon tape around the Down Pipe threads.
9.
Apply the supplied thread sealant to the Down Pipe threads:
–
Make sure all surfaces are clean and dry.
–
Apply a bead of sealant completely around the leading threads of the male fitting.
–
Force the adhesive into the threads to thoroughly fill all voids.
1
End Cap with O-ring
2
Parapet Pipe Arm
3
1/4-20 SS Cap Screw
4
Down Pipe
5
10-24 SS Pan Head Screw
Summary of Contents for VG5 600 Series
Page 1: ...AutoDome 600 Series Analog PTZ Camera VG5 600 Series en Installation Manual ...
Page 2: ......
Page 87: ......
