Bosch UPH Series, Operation Manual

Page: 78 / 82

Appendix A: Wiring Summary
Standard
Reference Description
F1 Feed 1, 24 VAC for optional washer
F2 Feed 2, 24 VAC for optional washer
AL1 Alarm 1 Input; triggered by external DC voltage
AL2 Alarm 2 Input; triggered by external DC voltage
AL3 Alarm 3 Input; triggered by external DC voltage
AL4 Alarm 4 Input; triggered by external DC voltage
Com Alarm Common (ground)
O1 Output 1; Normally Open; Dry contact relay output
C1 Common 1; common for Output 1
O2 Output 2; Normally Open; Dry contact relay output
C2 Common 2; common for Output 2
GND Video ground, black cable from coaxial termination cable
VIDEO Video output, clear cable from coaxial termination cable
(BILINX protocol)
RS-485-1 Pelco D Protocol 300 to 19200 Baud 8 N 1 Tx channel
A Data (connect to Peclo controller input Rx +)
B Data (connect to Pelco controller input Rx -)
RS-485-2 Peclo D protocol, 300 to 19200 Baud 8 N 1 Rx channel
A Data (connect to Pelco controller output TX +)
B Data (connect to Pelco controller output TX -)
B+ B (OSRD protocol)
B- Biphase - (OSRD protocol)
IR
Reference Description
F1 Feed 1, 24 VAC for optional washer
F2 Feed 2, 24 VAC for optional washer
AL1 Alarm 1 Input; triggered by external DC voltage
AL2 Alarm 2 Input; triggered by external DC voltage
LNO External IR Probe, Normally Open Contact
AGND Alarm Ground & External IR probe common
O1 Output 1; Normally Open; Dry contact relay output
17
78 en | Appendix A: Wiring Summary
High-Speed Positioning System
(HSPS)
2013.11 | 5.2 | F.01U.291.981 Operation Manual Bosch Security Systems, Inc.