Bosch UPH Series, Operation Manual

Page: 34 / 82

Assembling and Connecting IR360 Models (optional)
The device must be configured to mount two of the Bosch UFLED illuminators. The
illuminators are connected to the bracket supplied with the pan and tilt motor.
!
Caution!
For operational reasons, both spotlights must be fitted.
When turning on, the device looks for the angular reference.
Fitting the Bracket
Fitting the Bracket
Note: Use only the material supplied with the kit.
1.
Position the bracket on the bottom of the housing as shown in the illustration.
2. Insert the screws with the washers into the respective holes and tighten.
3. Make sure the bracket is secured firmly.
Figure 9.1: Fitting the Bracket
Reference Description
1 Screws
2 Washers
3 Bracket
4 Holes
Assembling the Spotlights
Assembling the Spotlights
1.
Position the bracket so that the threaded holes are on the same axis as the holes on the
body of the spotlight.
2. Fix the two components using the screw, the crinkle washer, and the plane washer.
9
9.1
9.2
34 en | Assembling and Connecting IR360 Models (optional)
High-Speed Positioning System
(HSPS)
2013.11 | 5.2 | F.01U.291.981 Operation Manual Bosch Security Systems, Inc.