–
Consider the decimal address and start adding the DIP switch values from the left,
skipping a DIP switch value that is higher than the decimal address.
–
Turn a DIP switch to “on” if its associated value is used for the address. Keep the DIP
switch “off” if its associated value is too high or is not needed to add up to the decimal
address.
For example, to convert the decimal address 237 to binary:
Flag each binary digit needed to add up to 237 starting from the left. Do not flag 512 and 256
since these values are larger than 237. The first binary value to flag is 128; then flag 64 and 32
adding up to 224. Do not flag 16 because that puts the decimal value over 237. The next digit
to flag is 8, then skip 4 (too large), and flag the 2 and 1. The flagged numbers should equal
237: 128+64+32+8+2+1=237.
The following table lists DIP switch positions for various decimal addresses:
DIP Switch Positions
10
9
8
7
6
5
4
3
2
1
512 256 128 64
32
16
8
4
2
1
Decimal Address Binary Value
1
1
OFF OFF OFF OFF OFF OFF OFF OFF OFF ON
2
10
OFF OFF OFF OFF OFF OFF OFF OFF ON
OFF
4
100
OFF OFF OFF OFF OFF OFF ON
OFF OFF OFF
8
1000
OFF OFF OFF OFF OFF OFF ON
OFF OFF OFF
143
1000 1111
OFF OFF ON
OFF OFF OFF ON
ON
ON
ON
299
1 0010 1011
OFF ON
OFF OFF ON
OFF ON
OFF ON
ON
998
11 1110 0110 ON
ON
ON
ON
ON
OFF OFF ON
ON
OFF
RS485 Line Termination
Serial Lines Termination Switches (refer to item 4 in , page 42):
–
Dip-switch 1 is not used (the RS485-1 line is not available).
–
Dip-switch 2 is used to enable the line termination of RS485-2 serial line (Pelco D only).
–
Down/On = terminated
–
Up/Off = Open
Biphase/Bilinx Termination
Bilinx and Biphase Switches (refer to item 5 in , page 42):
–
Dip-switch 1 is used to enable the line termination of a Biphase serial line.
–
Down/ON = terminated. Up/OFF = open (daisy chain).
–
Dip-switch 2 is used to select the video format (Down/ON = PAL, Up/OFF = NTSC).
11.4
11.5
44
en | Configuring the Device
High-Speed Positioning System
(HSPS)
2013.11 | 5.2 | F.01U.291.981
Operation Manual
Bosch Security Systems, Inc.
Summary of Contents for UPH Series
Page 1: ...High Speed Positioning System HSPS UPH Series ...
Page 2: ...en Operation Manual ...
Page 80: ......
Page 81: ......
