10
/104
A4... with HS5E(V)(L) control system Series 1x and 30
| Safety instructions
Bosch Rexroth AG, RE 92076-01-B/2021-04-22
2 Safety instructions
2.1 About this chapter
The HS5E(V)(L) control system has been manufactured according to the generally
accepted rules of current technology. There is still, however, a risk of personal injury
or property damage if this chapter and the safety instructions in this documentation
are not observed.
▶ Read this documentation completely and thoroughly before working with the
HS5E(V)(L) control system.
▶ Keep this documentation in a location where it is accessible to all users at all
times.
▶ Always include the required documentation when you pass the axial piston unit
on to third parties.
2.2 Intended use
The HS5E(V)(L) control system is a hydraulic component, which means that in
its field of application, it is classified neither as complete nor as partly complete
machinery in the sense of EC Machinery Directive 2006/42/EC. The component is
exclusively intended to form partly completed machinery or complete machinery
together with other components. The component should only be commissioned after
it has been installed in the machine/system for which it is intended, and the safety of
the entire system has been established in accordance with the Machinery Directive.
This product is intended for the following use:
The pressure flow control system is used for the electro-hydraulic pressure and
swivel angle control and torque limitation of an axial piston variable pump type
A4VSO, A4VBO, A4VSG or A4CSG.
▶ Observe the technical data, the application and operating conditions and the
performance limits according to the data sheets listed on page 6 and the
order confirmations.
The HS5E(V)(L) control system is a piece of technical work equipment and it is not
intended for personal use.
Intended use includes having completely read and understood this documentation,
especially the chapter on 2 "Safety instructions".
Operation is only allowed if you comply with national EMC regulations for the
present application. If you need information about EMC-compliant installation,
refer to Bosch Rexroth’s EMC test documentation (see data sheet 92076). Ensuring
compliance with the limit values required by national regulations is the responsibility
of the manufacturer of the system or machine.
• European countries: EC directive 2014/30/EU (EMC Directive)
• USA: See the national electrical system regulations (NEC), National organization
of the manufacturers of electrical systems (NEMA) as well as regional building
regulations.
▶ Observe the technical data, the application and operating conditions and the
performance limits as specified in the data sheet 92076 and in this document
and in the order confirmation. Information about approved hydraulic fluids can be
found in data sheet 92076.
The axial piston unit is only intended for commercial use and not for private use.