Bosch Rexroth CS660, Calibration Manual

Page: 19 / 31

19/27
Bosch Rexroth Canada I March 2021 ı Revision 3.0
‘ D ’ – Single Spn, ‘ D ’ – Dual Spn
Toggle 1
st
 3
rd
materials & calibrated gates
A digIn (Junction Box or CANIO board)
A digIn (Junction Box or CANIO board)
3.6 Air Gate
This feature supports air gate operation. It requires a digital input to monitor the air cylinder position.
When the input status changes the controller switch between 1
st and 3 rd solid and prewet materials, and
also set operation gate position to calibrated gate position for the material selected.
3.7 Gate Readback and Automatic Gate
Gate Readback Automatic Gate
It requires a gate sensor to measure It requires a gate cylinder with a
the current gate position. sensor to measure the gate position.
Sensor

A2-A (Junction box) Sensor

A2-A (Junction box)