50/57
Bosch Rexroth Canada ı 03.10.2011 ı Revision 5.4
17 Frequently Asked Questions (FAQs)
17.1 CS-440RC
1.
1.
1.
1.
What do those Headers in log data reports mean?
What do those Headers in log data reports mean?
What do those Headers in log data reports mean?
What do those Headers in log data reports mean?
Headers
Headers
Headers
Headers
Meaning
Meaning
Meaning
Meaning
Date and Time
This is the absolute time, at the start of the event
Event Type
This is the cause of the event, as follows:
•
STAT - System-Generated event, send the database to Compu-
Spread for diagnosis
•
INIT - rebooted the controller
•
RATE - Application Rate change, solid or liquid
•
GATE - Gate Position change
•
6HRS - Duration of event is 6 hours
•
DEIC - Deice-simulation turned on or off
•
ERR - Error occurred
•
CTRL - Change in control mode for conveyor
•
MATL - Change of solid or liquid material
•
GSLP - gate or solid or liquid change when leaving PROGRAM
mode
•
CTUP - control mode or system units change leaving PROGRAM
mode
•
SPIN - Spin Rate change when in g/m**2 mode
Solid Rate Normally kg/km
PreWet Rate Normally liter/tonne
Boom Status LCR to indicate whether left, centre, or right boom is on
Ground
Speed
Calculated speed, based on Total Time and Total Distance
Total Time Total Time of duration of this event, including blasting and pausing
Blast Time
Total time of blasting during this event
Pause Time Total time of pausing during this event
Total Dist. Total distance travelled during this event, including blasting and pausing
Blast Dist. Total distance travelled while blasting
Pause Dist. Total distance travelled while pausing
Total Solid Total solid delivered during this event, including blasting and pausing
Blast Solid Total solid delivered while blasting
Blast Number Number of times the Blast button was pushed
Total PreWet Total pre-wet delivered during this event, including blasting and pausing
