Installation 31/56
RE 91071-01-B/06.2018, A2FM/A2FE/A2FMT Series 70,
Bosch Rexroth AG
1
2
2
Fig. 9: Removing transport protection
1 Protective covers
2 Protective plugs/threaded plugs
Ports intended for connecting lines come with protective plugs or threaded plugs,
which serve as transport protection. Connect all ports required for functional
operation (see Table 15 Ports A2FM/A2FE/A2FMT series 70 on page 36).
Failure to do so could lead to malfunctions or damage. If a port is not being used,
plug it with a threaded plug since the protective plugs are not pressure-resistant.
The following information only applies to fixed motors with
pressure relief valves.
Setting screws are protected against unauthorized adjustment by tamper-proof
caps. Removal of the tamper-proof caps will void the warranty. If you need to
change the settings, please contact your local contact person. You can find their
contact information under
www.boschrexroth.com/adresses
7.4.7 Hydraulically connecting the axial piston unit
The machine/system manufacturer is responsible for sizing the lines. Connect the
axial piston unit to the rest of the hydraulic system in accordance with the hydraulic
circuit diagram of the machine/system manufacturer.
The ports and fastening threads are designed for the maximum permissible
pressures
p
max
; see Table 15 Ports A2FM/A2FE/A2FMT series 70 on page 36. The
machine/system manufacturer should ensure that the connecting elements and lines
correspond to the specified application conditions (pressure, flow, hydraulic fluid,
temperature) with the necessary safety factors.
Connect only hydraulic lines that are appropriate for the axial piston unit port
(pressure level, size, system of units).
