20/56
Transport and storage
Bosch Rexroth AG
, A2FM/A2FE/A2FMT Series 70, RE 91071-01-B/06.2018
6 Transport and storage
▶
Always observe the necessary ambient conditions for transport and storage, see
chapter 6.2 “Storing the axial piston unit” on page 22.
Information on unpacking can be found in chapter 7.1 “Unpacking” on page 25.
6.1 Transporting the axial piston unit
The following transportation options are available depending on weight and duration
of transport:
• Transporting by hand (chapter not relevant for this axial piston unit)
• Transporting with a lifting device (eye bolt or lifting strap)
Table 6: Dimensions and weights for A2FMn/A2FEn
nominal pressure 300 bar, max. pressure 350 bar
Size
56
63
80
90
107
Weight
kg
17
17
17
23
23
Width
mm Dimensions vary by equipment. The values applicable for your axial piston
unit can be found in the installation drawing (request if necessary).
Height
mm
Depth
mm
Table 7: Dimensions and weights for A2FMM/A2FEM
nominal pressure 400 bar, max. pressure 450 bar
Size
45
56
63
80
90
Weight
kg
17
17
17
23
23
Width
mm Dimensions vary by equipment. The values applicable for your axial piston
unit can be found in the installation drawing (request if necessary).
Height
mm
Depth
mm
Table 8: Dimensions and weights for A2FMH/A2FEH
nominal pressure 450 bar, max. pressure 500 bar
Size
45
56
63
80
90
Weight
kg
17
17
17
23
23
Width
mm Dimensions vary by equipment. The values applicable for your axial piston
unit can be found in the installation drawing (request if necessary).
Height
mm
Depth
mm
Table 9: Dimensions and weights for A2FMT
Max. pressure 420 bar
Size
56
63
80
90
107
Weight
kg
17
17
17
23
23
Width
mm Dimensions vary by equipment. The values applicable for your axial piston
unit can be found in the installation drawing (request if necessary).
Height
mm
Depth
mm
Weight may vary by equipment.
Dimensions and
weights
