manualshive.com logo in svg

Bosch PRAESENSA PRA-AD604, Configuration Manual, Page: 29 / 164

Share
Download
Bosch PRAESENSA PRA-AD604 Configuration Manual Download Page 29

PRAESENSA

Getting started | en

29

Bosch Security Systems B.V.

Configuration manual

2020-09 | V1.20 | PRAESENSA 1.20

3.2.9

Optional: Install the Open Interface

The Open Interface application software is part of the PRAESENSA optional software. See
(Mandatory) software, page 16 (*.zip). If you want to use the Open Interface with third party
applications, it needs to be installed on your PRAESENSA configuration computer.
To install, proceed as follows:
1.

Browse to, and run

, the file named: Bosch.OpenInterface‑Net‑installer.exe

–

The setup program Open Interface starts.

–

Follow the onscreen instructions.

2.

A notification is displayed when the installation is finished.

3.

Go to

 

Open interface, page 114 and Optional: Using the Open Interface, page 132

4.

Continue

 with: 

Logon the application, page 35

Summary of Contents for PRAESENSA PRA-AD604





































































































































































Reviews:

No comments