manualshive.com logo in svg

Bosch PRAESENSA PRA-AD604, Configuration Manual, Page: 25 / 164

Share
Download
Bosch PRAESENSA PRA-AD604 Configuration Manual Download Page 25

PRAESENSA

Getting started | en

25

Bosch Security Systems B.V.

Configuration manual

2020-09 | V1.20 | PRAESENSA 1.20

OMNEO Control software installation

The OMNEO Control software is optional PRAESENSA software. See 

(Mandatory) software,

page 16. It can be downloaded from the Bosch download area: 

https://

licensing.boschsecurity.com/OMNEO/html/load.htm?1000

. It is named as OMNEO control

Vx.xx (where x.xx is the version release and will be changed at updates and new releases).
The OMNEO Control software is available for the Windows operating system.
–

Download

 the software file as follows:

–

The installation process is described in a separate manual, called: OMNEO Control
Software. See the Bosch download area: 

https://licensing.boschsecurity.com/

OMNEO/html/load.htm?1000

.

1.

Go to

 

https://licensing.boschsecurity.com/OMNEO/html/load.htm?1000

 > OMNEO

control Vx.xx and be sure to 

select

 and 

click

 the right version for your system (the 32‑bit

or 64‑bit software version).
–

Pressing the hotkey Pause will open a window with information about your
system.

–

The download is a .zip file archive. Zip file archives have a .zip file name extension.

2.

Save

 the .zip file to a folder on your Windows computer.

3.

Windows will 

unpack

 the downloaded .zip file archive when you right click on the file

name and select 

Extract

.

–

Follow the onscreen instructions.

4.

Regularly check

 the OMNEO control Vx.xx software for updates and new releases.

Refer to

–

Related documentation, page 7

3.2.7

Optional: Install (OMNEO) Network Docent

Network Docent is developed to help AV operators in their daily job. The software scans and
visualizes the network environment, giving insight into all devices and cable-connections of a
network-based AV system. Network Docent is able to identify and provide guidance on solving
common and simple network errors that cause disruption or improper operation of the AV
system. As a result, Network Docent will reduce time and effort, when installing or operating a
network-based AV system.

Features

–

Detection and visualization of OMNEO devices connected to the (PRAESENSA) local
network.

–

Detection and visualization of Ethernet switches with LLDP (Link‑Layer Discovery
Protocol).

–

SNMP (Simple Network Management Protocol) support.

–

Configuration and communication error detection.

–

Error and event log.

–

Troubleshooting knowledge base.

–

List of connected endpoints and alerts.

Installation

The Network Docent software is PRAESENSA

 

optional software. See 

(Mandatory) software,

page 16. It can be downloaded from the Bosch download area: 

https://

licensing.boschsecurity.com/OMNEO/html/load.htm?1000

. It is named as Network Docent

Vx.xx (where x.xx is the version release and will be changed at updates and new releases).
–

The installation process is described in a separate manual, called:

Summary of Contents for PRAESENSA PRA-AD604





































































































































































Reviews:

No comments