manualshive.com logo in svg

Bosch PRAESENSA PRA-AD604, Configuration Manual, Page: 15 / 164

Share
Download
Bosch PRAESENSA PRA-AD604 Configuration Manual Download Page 15

PRAESENSA

Getting started | en

15

Bosch Security Systems B.V.

Configuration manual

2020-09 | V1.20 | PRAESENSA 1.20

3.2

Install the system software

The PRAESENSA system software installation procedure consists of the following steps:
1.

Check if the computer fulfills the minimum requirements to install and run the
PRAESENSA (related) software. See 

PC requirements, page 15.

2.

Installation of the (mandatory) software package on the configuration computer. See
(Mandatory) software, page 16.

3.

Installation of the firmware on the system controller and other PRAESENSA network
devices. See 

Check/Upload the devices firmware, page 20.

4.

Check network and web browser settings, page 30.

5.

Optional: Install the Logging Server, page 22

6.

Optional: Install the Logging Viewer, page 23

7.

Optional: Install OMNEO Control, page 24

8.

Optional: Install (OMNEO) Network Docent, page 25

9.

Optional: Install Dante Controller, page 27

10.

Optional: Install the Open Interface, page 29

11.

Logon the application, page 35

3.2.1

PC requirements

The PRAESENSA software and applications can run on any PC that meets the following
minimum requirements:

Item

Minimum requirement

Operating system

Microsoft® Windows 7, Windows 8.1 or Windows 10
Professional; 32‑bit or 64‑bit.
–

Keep the PC updated with the latest Windows updates.
This makes sure that the PC contains the most recent
version and service packs of the Microsoft® Jet 4.0
database, which is used by the Logging Server. See also
http://support.microsoft.com/common/international.aspx

Processor

X86 or X64. Dual core 2.4 GHz

Network connection

Ethernet 100 base‑T

Internal memory

 (RAM)

4 GB

Free disk space

Depends on the amount of events that must be stored, but it is
recommended to have at least 10 GB of free disk space.

Screen resolution

1366 × 768 pixels. 16‑bit or 32‑bit color depth

Summary of Contents for PRAESENSA PRA-AD604





































































































































































Reviews:

No comments