Easy Series
ITS-DX4020-G Communicator Configuration | en
69
Bosch Security Systems, Inc.
System Reference Guide
F01U087835 | 02 | 2008.10
Table 9.6
ITS-DX4020-G Basic Parameters
Table 9.7
ITS-DX4020-G Advanced Parameters
ID
Parameter
Default
Values
Description
1
Current Password
4020G
4 to 15 characters
Mandatory and case sensitive.
2
New Password
none
4 to 15 characters
New password, as desired. Case sensitive
3
SIM PUK,PIN
none
Maximum 10 numeric
digits each
Sets the PIN into the SIM and the ITS-
DX4020-G
4
SIM PIN
No PIN
4 numeric digits
Sets the PIN in the ITS-DX4020-G.
10
GPRS APN
<blank>
1 to 63 characters
Access point name.
11
GPRS username
none
1 to 63 characters
Username for wireless service provider
(not always required).
12
GPRS password
none
1 to 63 characters
Password for wireless service provider (not
always required).
13
Src port
7700
1 to 65535 characters
Sets the port for the ITS-DX4020-G.
14
Bus Address
134
SDI: 80, 88
Option Bus: 134
Sets the option bus address for
communication with the control panel. For
Easy Series, use Address 134.
15
AES Encryption
0
0 = Disabled
1 = Enabled
Security encryption on/off; must match
encryption settings in the receiver.
16
AES Encryption Key
<blank>
32 characters max.
0-9, A-F, a-f allowed
Key must match encryption key in the
receiver.
ID
Parameter
Default
Values
Description
50
DTMF digit timeout
500
100 to 3000 ms
Acceptable time between dialled DTMF
digits from the panel.
51
GPRS ACK timeout
10
6 to 120 secs
GPRS restarts if there is no response by
the entered time.
52
GPRS Transmit buffer
lifetime
15
6 to 120 secs
Duration the panel messages are buffered
in the communicator before being
discarded.
53
GSM CODEC setting
0
0 = Full Rate (FR)
1 = Adaptive Multi-rate
(AMR)
Set to Full Rate when GSM is being used.
54
GSM transmit gain
5
0 to 10
Gain on transmitted GSM signals
55
GSM receive gain
5
0 to 10
Gain on received GSM signals.
56
Enable incoming GSM
calls where supported
1
0 = Disabled
1 = Enabled
Enables/Disables incoming GSM calls.
