Easy Series
Device Specifications and Overview | en
79
Bosch Security Systems, Inc.
System Reference Guide
F01U087835 | 02 | 2008.10
Add a DX2010 After Adding Wireless Points
If you add a DX2010 module after wireless points are added, based on its DIP switch address,
the DX2010 replaces the conflicting group of wireless points.
For example, if wireless points occupy Points 9 to 24, and you need Points 17 to 24 as wired
points, a DX2010 module with Address 103 replaces the wired points occupying Points 17 to
24.
If the next point grouping is available, for this example, Points 25 to 32, the control panel
retains all point programming except for voice descriptions, and moves the conflicting
wireless points to the next point grouping. You must re-record voice descriptions for the
points that were moved.
If the next point grouping is not available, the control panel deletes the conflicting wireless
points from the system.
10.4
Conettix DX4020 Network Interface Module
The Conettix DX4020 Ethernet Network Interface Module creates two-way communications
over Ethernet networks for compatible control panels.
10.5
ITS-DX4020-G Communicator
The Conettix ITS-DX4020-G Communicator is a multi-function, dual-path security
communicator that communicates with Bosch Security Systems, Inc. Conettix receivers. It is
compatible with DX4020 protocols, and it provides a cellular (GSM/GPRS) modem.
DX4020 Network Interface Module
Operating Voltage:
12 VDC nominal
Current Draw:
10Base-T:
110 mA maximum;
100Base-T:
135 mA maximum
Operating Temperature:
0°C to +50°C (+32°F to +122°F)
Relative Humidity:
5% to 85% at +30°C (+86°F)
ITS-DX4020-G GPRS/GSM Communicator
Operating Voltage:
12 VDC nominal, 10 VDC to 15 VDC
Current Draw:
Standby: 70mA, Alarm: 400mA
Operating Temperature:
-10°C to +55°C (+14°F to +131°F)
Relative Humidity:
5% to 95%
Ripple/Noise:
200 mVpp maximum
