Easy Series
System Installation and Configuration | en
17
Bosch Security Systems, Inc.
System Reference Guide
F01U087835 | 02 | 2008.10
2.3
Apply System Power
1.
Connect battery power to the control panel. Refer to
Figure 1.1
, Page 6.
2.
Use a cable tie to secure the incoming AC wires to the enclosure, where required. Refer
to
Figure 2.3
, Page 17.
Figure 2.3
Cable tie for MAINS to Power Supply
3.
Place the terminal cover over the power supply terminals.
i
NOTICE!
Because the control panel is permanently connected equipment, a readily accessible
disconnect device must be included into the building installation wiring.
An external earth ground is required to ensure safe and proper system operation. Failure to
ground the system can cause personal injury and degraded system performance, such as
problems with tokens or noise on the control center.
