24
Operation
6 720 617 763 (2008/09)
B
Press .
The switching point and corresponding seg-
ment on the display start to flash.
B
Turn the rotary selector
until the desired
time is displayed (e.g.
05:30
h).
The ring of segments around the perimeter of
the display always shows the effect of the
change on the heating programme.
B
Press .
The switching point is saved. The associated
operating mode now starts flashing on the dis-
play.
B
Turn the rotary selector
until the desired
operating mode (e.g.
Economy
is displayed.
The ring of segments around the perimeter of
the display always shows the effect of the
change on the heating programme.
B
Press .
The operating mode is saved. Setting of
P1
is
now complete.
B
You can now:
–
change more switching points and operat-
ing modes in the same way, or
–
finish programming and return to the basic
display by pressing
.
Using groups of days when programming
In many cases, you may want to programme the
same switching points for several days of the
week, say for all working days. Equally, you may
also want a different programme for just one of
those days.
Using the groups of days when programming ena-
bles you to complete the process in only a few
steps.
B
For a group of days, e.g.
Mon - Fri
, programme
the switching points and operating modes
that are the same for the majority of those
days.
B
Then change the switching points for the days
that are different.
9
12
h
15
18
21
24
h
3
6
6 720 617 763-11.1O
9
12
h
15
18
21
24
h
3
6
6 720 617 763-12.1O
9
12
h
15
18
21
24
h
3
6
6 720 617 763-13.1O
menu
