21
Operation
6 720 617 763 (2008/09)
–
If the temperature measured in the domes-
tic hot water cylinder is below the speci-
fied temperature, the cylinder is re-heated.
–
Once the specified temperature is reached
(or exceeded), cylinder heating is stopped.
You can set up a domestic hot water programme
for the domestic hot water system.
DHW circulation program
The circulation programme specifies when a con-
nected secondary circulation pump for domestic
hot water runs.
You can set up a circulation programme for the
domestic hot water system.
5.2 Setting programmes
5.2.1 Viewing on the display and navigating
through the menu
The user interface of the weather compensation
controller FW 100 is implemented as a menu sys-
tem. Within that menu system, the various func-
tions are arranged in a hierarchical structure. For
greater clarity, the menu system is subdivided
into three sections (
MAIN MENU
,
INFO
, and
INSTALLER SETTINGS
). Each section can be
accessed by its own button. The entire menu
structure is shown in tabular form in Sections
To navigate through the menu system:
•
Pressing
opens
the
MAIN MENU
. From
any point within the
MAIN MENU
, pressing
takes you back to the basic display.
•
Pressing
opens the
INFO
. From any
point within the
INFO
menu, pressing
takes you back to the main menu.
•
Pressing and holding
for at least 3 sec-
onds opens the
INSTALLER SETTINGS
menu.
From any point within the
INSTALLER SET-
TINGS
menu, pressing
takes you back to
the main menu.
•
The menu option/parameter selected in each
case is shown
.
•
Arrows in the left margin indicate that there is
more information than can be shown on the
display at once. It can be viewed by turning
the rotary selector
.
•
Pressing the rotary selector
opens the
submenu associated with the selected menu
option/parameter or activates editing mode
for the parameter (the parameter setting
starts flashing).
If the domestic hot water pro-
gramme changes from a higher to a
lower specified temperature, the
water in the cylinder will not imme-
diately cool to the lower tempera-
ture, i.e. water at a higher
temperature will continue to be
available for some time. However,
the cylinder will not be reheated
until the temperature falls below
the new, lower specified tempera-
ture.
The functions of the controls and the
meanings of the symbols on the dis-
play are explained on pages 2 and 3.
menu
menu
info
info
menu
menu
inverted
