52
INSTALLER SETTINGS menu settings (for installers only)
6 720 617 763 (2008/09)
8
INSTALLER SETTINGS menu settings (for installers
only)
Detailed instructions on navigating through the
menu structure, programming, deleting settings
and resetting to the default settings are provided
in Section 5.2 starting on page 21.
8.1 INSTALLER SETTINGS menu
summary and settings
The tables set out below provide
•
an overview of the menu structure (column 1).
The menu level is indicated by different
shades of grey.
For example, on the menu
Solar sys parame-
ters
, the submenus
1. Standard system
and
Solar optimisation
are at the same level.
•
an overview of the default settings (column 2),
e.g. for the purposes of resetting individual
menu options to the default.
•
an overview of the adjustment ranges of the
individual menu options (column 3).
•
space for making a note of your personal set-
tings (column 4).
•
references to the detailed descriptions of the
individual menu options (column 5).
The
INSTALLER SETTINGS
menu is
intended only for installers.
B
To open
INSTALLER SETTINGS
:
press and hold
for approx.
3 seconds.
menu
The menu options are only shown if
the system components are present
and/or active and if there is no re-
mote control access to them. Some
menu options are not shown be-
cause they are switched off by a set-
ting for another menu option.
B
Always set or skip menu options
in order. In that way, subsequent
menu options will be automati-
cally adjusted or not shown.
