25
Operation
6 720 617 763 (2008/09)
Copying ready-made programmes
There are eight ready-made heating programmes
permanently stored on the heating controller.
They can not be directly applied to a heating cir-
cuit.
To be able to use the ready-made heating pro-
grammes, you must copy them to one of the loca-
tions for heating programmes (A to C), where you
can also adapt them if necessary
(
Æ
Section 5.2.2).
Select the storage location
to which the pro-
gramme is to be copied
(A to C):
B
Open menu option
Heating > Programme >
Edit > A:Programme A ... C:Programme C
.
B
Press the rotary selector
twice.
The function
Copy from preset programme
is
selected and the option
No
is flashing.
B
Turn the rotary selector
until the last line
of the display shows the heating programme
that is to be copied (e.g.
Full weekday
worker
).
B
Press .
The heating programme has now been copied.
Resetting an entire programme (replacing with
default settings)
The unit is supplied with programmes for heating
and domestic hot water already stored in the
memory (
Æ
Section 13 on page 75).
Overwrite one of your own heating programmes,
A to C, as follows:
B
Open the programme concerned (e.g. menu
path:
Heating > Programme > Edit > C:Pro-
gramme C
or menu path:
Domestic hot
water > DHW programme > Edit
).
B
Turn the rotary selector
to select the
option
Reset factory settings
.
B
Press .
The programme has now been reset to the
default settings.
Resetting all settings (for installers only)
This function resets all settings on the
MAIN
MENU
and the
INSTALLER SETTINGS
to their
default settings.
Following such a reset, your
heating installer will need to commission the
system again!
If the basic display is showing:
B
Simultaneously press and hold
and
until the following warning message appears:
B
Continue holding
and
until the fol-
lowing message appears:
B
Press .
All settings have now been reset to their
defaults with the exception of the date and
time, which remain unchanged.
You can also copy any of the pro-
grammes A to C to another storage
location as a template.
6 720 617 763-14.1O
9
12
h
15
18
21
24
h
3
6
menu
6 720 617 763-15.1O
9
12
h
15
18
21
24
h
3
6
menu
6 720 617 763-16.1O
9
12
h
15
18
21
24
h
3
6
