8
en | For your information
Panel Controller
2017.09 | 7.0 | F.01U.258.929
User Guide
Bosch Sicherheitssysteme GmbH
1
For your information
Notice!
A language dependent inscription strip (ordering number F.01U.343.398) for insertion into
the main panel controller is attached to this operation guide.
This operation guide contains important information and notes on operating the FPA-5000/
FPA-1200.
Using the step-by-step directions, you can familiarize yourself with the individual functions:
–
In overview, page 19 provides an overview of the operating and display elements and the
touch screen.
–
In Operating principle, page 24, you will learn how to navigate through the individual
menus and which selection possibilities are available to you.
Each function is described in detail in an individual chapter.
Notice!
In standby mode, the standby screen is displayed. This contains different information
depending on the configuration.
If no longer operated, the panel controller switches to standby mode after 5 minutes and an
alarm event occurs after one hour. The touch screen backlighting switches off. To quit
standby mode, touch any part of the touch screen.
To call up the start menu or change the language display, see Operating principle, page 24.
You will find specific topics in the table of contents. If you are already practiced in the
handling of menus, you can use the overview of all menus in All functions at a glance, page 12.
See also
–
In overview, page 19
–
Operating principle, page 24
–
All functions at a glance, page 12
–
In overview, page 19
–
Operating principle, page 24
–
All functions at a glance, page 12
1.1
Open Source license agreement
Notice!
Bosch Sicherheitssysteme GmbH uses open source software within this product. The
declaration of the components and their respective licenses can be found on http://
www.boschsecurity.com/oss/.
1.2
Depiction of steps
The sequence of steps that you need to execute a function is depicted as follows:
1.
In the start menu, select
Bypass Block
2.
Bypass
In more detailed form:
1.
Call up the start menu.
2.
Select
Bypass Block
.
3.
Select
Bypass
.
Summary of Contents for FPA-1200-MPC-C
Page 1: ...Panel Controller MPC xxxx C FPA 1200 MPC C en User Guide ...
Page 2: ......
Page 99: ......
