Bosch FPA-1200-MPC-C, User Manual

Page: 83 / 100

Panel Controller Configuration | en 83
Bosch Sicherheitssysteme GmbH User Guide 2017.09 | 7.0 | F.01U.258.929
19 Configuration
This chapter contains information about the following points:
–
Input / Output Group Set Up, page 83
– Group setting, page 85
– Detector sensitivity, page 85
– Operator, page 86
– Rename elements, page 87
– Network services, page 87
– Overview, page 88
19.1 Menu overview
Configuration -> Set input / output
groups Set groups
Detector sensitivity Operator
Rename elements Overview
Network services About ...
19.2 Input / Output Group Set Up
Input and output groups can be created using the FSP-5000-RPS programming software:
Input groups consist of several detectors and/or logical zones;
Output groups consist of signaling devices and transmission devices.
Specify which input group activates which output group by using the programming software.
The following can be carried out on the panel controller:
–
Elements can be added to, or removed from input or output groups.
– Input or output groups can be renamed.
19.2.1 Adding or deleting elements
Input group
In order to add elements to an input group or remove elements from it:
1.
In the start menu, select Configuration
2. Set input / output groups
3. Input group
Two different lists are displayed. See Working with lists, page 26.
4. Select a list, e.g. By description .
A list of the various input groups is displayed. Refer to Scrolling through lists, page 27 for
information on how to navigate through a list.
5. Select the list field you require.
The list field is marked.
You can select various options:
–
Delete all : Delete all elements in the selected input group.
– Show / Change : Display all elements in the selected input group and delete
individual elements.
– Add : Display all elements that have not yet been assigned to an input group, and add
individual elements.
– Cancel : Cancel the operation.
To change the name of the input group, see Change name, page 85.