Panel Controller
Operating principle | en
25
Bosch Sicherheitssysteme GmbH
User Guide
2017.09 | 7.0 | F.01U.258.929
In addition, the user ID of the user who has logged on is displayed on the start page on the
info bar.
Notice!
In the FSP-5000-RPS programming software, a time span can be specified after which an
operator who is logged in to the panel controller is logged out.
5.1.2
Logging out
1.
To log out of the panel controller, press the "key" key:
An input window with the request
Log off?
is displayed:
2.
Select
Yes
to confirm the request or
No
to cancel the operation.
5.2
Access authorization
Notice!
Depending on your access authorization, you can only use certain functions of the panel
controller.
If you select a function for which a particular access authorization is required and no user with
the appropriate authorization is logged on, you will be asked to enter your user ID and
password.
Access authorizations are assigned for access levels two to four. Only a few functions can be
used on access level one, while all functions can be used on access level four.
To check the access authorization of the person who is logged in, press the "key" key after
logging in:
The relevant access authorization is displayed.
5.3
Calling up the start menu
Press the "home" key to return to the start menu from any submenu.
Notice!
The display changes from each menu element to the standby display if no entries are made
within one minute; see also Standby display.
5.4
Personalized menu
Via the Remote Programming Software you can configure your personalized start menu which
displays up to eight functions you need most often directly when you log in to the panel.
To retrieve the personalized menu log into the panel: Press the “key” key and enter your user
lD and password.
To change back from the personalized menu to the common start menu press the “home” key.
Summary of Contents for FPA-1200-MPC-C
Page 1: ...Panel Controller MPC xxxx C FPA 1200 MPC C en User Guide ...
Page 2: ......
Page 99: ......
