Panel Controller
Operating principle | en
27
Bosch Sicherheitssysteme GmbH
User Guide
2017.09 | 7.0 | F.01U.258.929
1.
Bypass Block
2.
Bypass
3.
Detector
Three sorting criteria are offered for selection:
–
By description
–
By number
–
By number (no description shown)
4
Select
By description
.
A list of all detectors is displayed, sorted in alphabetical order.
5.7.1
Scrolling through lists
On the display, only a limited number of list fields can be displayed.
Select the "up arrow" key to scroll back through a long list:
Select the "down arrow" key to scroll forward through the list:
An arrow is only displayed if scrolling is possible.
Rapid scrolling:
To scroll quickly through a list, press the "double arrow" key on the membrane keypad or on
the status bar of the display.
A scrollbar appears on the status bar:
Gently touch the horizontal line to jump to a particular place.
To jump to the beginning of a list, touch:
To jump to the end of a list, touch:
5.7.2
Various states of list fields
Various states can be assigned to an element or an element group, depicted by a list field. The
following table provides information about the possible states:
List field
State of list
field
Meaning
TEXT
normal
Element in normal state
TEXT
marked
Selected element
TEXT
Mode assigned
The element was assigned the bypassed mode;
seeAssigning mode, page 28.
Summary of Contents for FPA-1200-MPC-C
Page 1: ...Panel Controller MPC xxxx C FPA 1200 MPC C en User Guide ...
Page 2: ......
Page 99: ......
