Panel Controller
Further functions | en
91
Bosch Sicherheitssysteme GmbH
User Guide
2017.09 | 7.0 | F.01U.258.929
–
To unblock the service select
Unblock
Remote Maintenance
.
Notice!
The Blocking/Unblocking of Remote Maintenanceis done for all panels in the network. You
cannot block/unblock this service for a single panel.
Remote Alert
To stop the transmission of Remote Alert messages:
–
In the start menu, select
Further functions
–
Remote Services
–
Select
Block
Remote Alert
.
The transmission of messages to the Remote Portal is stopped until the next restart of
the panel controller.
–
To unblock the service select
Unblock
Remote Alert
.
Notice!
The Blocking/Unblocking of Remote Alert is done for all panels in the network. You cannot
block/unblock this service for a single panel.
20.5
Change password
Notice!
If all operators with the same access authorization have the same password, this function
cannot be used.
1.
In the start menu, select
Further functions
2.
Change password
A list of all operators is displayed.
Refer to Scrolling through lists, page 27 for information on how to navigate through a list.
3.
Select the list field you require.
4.
Enter the password.
On the display, each digit of the password is indicated with an asterisk so that nobody
else can see the password.
5.
Enter a new password and repeat the entry in the bottom field again.
6.
Select
OK
to confirm the entry or
Cancel
to cancel the operation.
20.6
Performing a fire drill
During a drill, all signaling devices are activated.
!
Caution!
If a genuine alarm is reported during a fire drill, the fire drill is abandoned. The fire drill can
only be restarted when the alarm is ended.
To start a drill:
1.
In the start menu, select
Further functions
2.
Drill
3.
Confirm
Start drill
with
OK
The drill is started.
To end the drill, select
Stop drill
.
Summary of Contents for FPA-1200-MPC-C
Page 1: ...Panel Controller MPC xxxx C FPA 1200 MPC C en User Guide ...
Page 2: ......
Page 99: ......
