DiBos/DiBos Micro
Default Configuration | en
93
Bosch Sicherheitssysteme GmbH
Installation Guide
F.01U.033.308 | V7 | 2009.09
Configuring the e-mail server setup
Alarm processing
menu >
Configure E-mail...
button
or
Error forwarding
menu >
E-mail server
button
E-mails can be sent regardless of whether or not you log on to the SMTP server.
1
Transmitter name:
Enter the name of the sender. The name appears as the
sender name for the e-mail recipient.
2
E-mail address:
Enter the e-mail address of the sender.
3
SMTP server:
Enter the name or the IP address of the SMTP servers (e-mail
server).
4
With log-on to SMTP
server
E-mails can only be sent when the sender is authorized to do
so. The SMTP server checks the sender's authorization in this
case.
5
User name:
Enter the user name for logging on to the SMTP server.
6
Password:
Enter the password for logging on to the SMTP server.
Password transmission is encrypted.
7
Save
The entries are saved.
NOTICE!
–
For information on how to add an e-mail recipient for alarm processing, see
Section 6.6 Configuring Alarm Processing
–
For information on how to add an e-mail recipient for error forwarding, see
Section Adding a recipient/editing recipient data, page 110
