Bosch DiBos Installation Manual Download Page 123

Page: 123 / 158

DiBos/DiBos Micro

Remote configuration | en

123

Bosch Sicherheitssysteme GmbH

Installation Guide

F.01U.033.308 | V7 | 2009.09

Remote configuration

A remote station can be configured remotely via the DiBos application if this remote station is

located in the device list of the local DiBos.

In contrast to the standard configuration, with remote configuration the following limitations

apply:

–

It is not possible to configure analog cameras and audio inputs.

–

It is not possible to configure the menus

Drives

Security and network

and

Administration and dongle

–

The option of creating network drives via the

Export video scheduler

menu is not

available. A target path can be selected.

–

The option of configuring the alarm procedure via

Options

is not available.

–

It is not possible to display a live image in the configuration page of a BVIP device.

CAUTION!

Ensure that a DiBos device is not configured remotely if the local configuration is already open

at the time. This procedure may lead to loss of data.

Summary of Contents for DiBos































































































































































Search results

Summary of Contents for DiBos

Reviews:

Related manuals for DiBos

Brands by name

Popular brands

Bosch DiBos, Installation Manual

Search results

Summary of Contents for DiBos

Reviews:

Related manuals for DiBos

Brands by name

Popular brands