Bosch DiBos Installation Manual Download Page 100

Page: 100 / 158

100

en | Default Configuration

DiBos/DiBos Micro

F.01U.033.308 | V7 | 2009.09

Installation Guide

Bosch Sicherheitssysteme GmbH

6.9

Configuring the Export Video Scheduler

Export video scheduler

In this dialog box you can specify jobs for the export video scheduler.

Job

Add

Adds a new job. The name of the new job is sequentially

numbered and can be renamed.

Copy

An existing job is copied. To do so, select the job.

Remove

Removes a job. To do so, select the job.

Rename

The name of the job can be changed. To do so, select the job.

The name must not contain any special characters.

Export video

A maximum of 160 GB per day can be exported via a 1-gigabit

network. This corresponds to the maximum recording

capacity of 30 analog cameras.

The following requirements must be adhered to during the

export process:

–

In live mode, no more than 16 cameras are displayed.

–

No search available in the database.

–

No playback of recorded images.

Number of days to be

exported

Enter the number of past days to be exported.

Summary of Contents for DiBos































































































































































Search results

Summary of Contents for DiBos

Reviews:

Related manuals for DiBos

Brands by name

Popular brands

Bosch DiBos, Installation Manual

Search results

Summary of Contents for DiBos

Reviews:

Related manuals for DiBos

Brands by name

Popular brands