120
en | Default Configuration
DiBos/DiBos Micro
F.01U.033.308 | V7 | 2009.09
Installation Guide
Bosch Sicherheitssysteme GmbH
Load
Click the button and answer the warning note with
OK
if the
previous file is to be overwritten or with
Cancel
if you want to
modify the file.
3
Configuration wizard
Start
Click the button to start the Configuration wizard.
Caution:
The default configuration is overwritten with the last settings
saved in the Configuration wizard. Overwriting settings may
lead to the loss of previously configured settings (e.g.
recording settings, IP cameras). We recommend only using
the Configuration wizard for a newly installed system.
4
Language
Click the arrow and select the language for the operating
system and the DiBos software.
Note:
If the language is changed, the system must be rebooted.
Region
Click the arrow and make your selection.
Keyboard layout
Click the arrow and select the layout of the keyboard
connected.
5
Licensing
The software is activated using a license activation key.
Devices that have been supplied with a HW dongle also
require the activation of the HW dongle.
Note:
–
Factory-supplied DiBos recorders are already activated.
The license activation key is affixed to the front flap for
19-inch devices. The license activation key for DiBos
micro can be found on the left-hand side of the unit.
–
DiBos receivers, DiBos IP recorders and DiBos
expansions are supplied with an authorization letter,
which includes an authorization number. After the
software is installed, they must be activated with a
license activation key. See
Section 6.15.1 Activating a
License
to find out how you obtain these license
activation keys.
–
For devices with an existing dongle, the dongle is further
required. This also applies for the dongle extension file.
However, additionally ordered features must still be
activated with a license activation key.
License packages for
activation
The license packages that can be activated using a license
activation key are displayed.
License
Click the arrow and select a license package you would like to
activate.
Activate
Click the button to activate the selected license package. A
dialog box will open for you to enter the license activation
key.
Activated packages
The activated license package is displayed.
