Bosch Carephone 52+, Operating Manual

Page: 34 / 54

34 en | Programming Carephone 52+
F.01U.031.884 V4 | 2009.03 Operating Manual Bosch Security Systems
20 Dialling modes
Ascertain whether the telephone line operates with the pulse
dialling mode (PD) or with dual-tone multi-frequency (DTMF)
dialling. You can identify DTMF by the fact that when you dial
you hear tones of different pitch in the telephone receiver.
Selecting pulse dialling will only be necessary in exceptional
cases. You can program:
X
0 = PD
X
1 = DTMF
23 Waiting time for repeated emergency call
This function is used to check whether a person rendering
assistance arrives promptly. An emergency call is repeated
until it is acknowledged by pressing the S button on the Care-
phone 52+. The emergency call is repeated if this time is
exceeded.
X
Enter a time between 0 and 99 minutes.
0 = Off.
This function is only available with the Bosch RB2000 proto-
col and the Bosch advanced ANT protocol.
24 Confirmation with call
When the repeated emergency call has been acknowledged,
you can speak directly to the call centre.
You can program:
X
0 = the repeated emergency call is acknowledged by
pressing the S button; a call is not made to the call centre.
X
1 = the repeated emergency call is acknowledged by
pressing the S button; a call is made to the call centre.
The person rendering assistance can speak to the call
centre immediately.
Table 12.2