manualshive.com logo in svg

Bosch Carephone 52+, Operating Manual

Share
Download
Bosch Carephone 52+ Operating Manual Download Page 25

Carephone 52+

Installation | en

25

Bosch Security Systems

Operating Manual

F.01U.031.884 V4 | 2009.03

3.

Now fit the plug on the telephone cord into the N socket of 

your telephone outlet. 

4.

Plug the power adapter into the line power outlet.

All the indicator lamps light up for around 2 seconds (battery 

test). The indicator lamps on the activity monitor reset button 

and the emergency call button now light up. The unit immedi-

ately offers a choice of languages and then switches to standby 

mode, see Section 12.6 The main programming steps, page 31, 

Programming step 01. The unit can now be programmed.

!

CAUTION! Only connect the unit to a phone outlet that has 

been correctly installed by your telephone service provider. 

i

NOTICE! If you perform step 4 before step 3, you will hear the 

announcement line failure.

!

CAUTION! The backup battery will now be charged up. 

The battery is fully charged after 12 hours. The unit's full 

volume will not be available until the battery is fully charged.

Summary of Contents for Carephone 52+























































Reviews:

No comments

Brands by name

Popular brands

Load more brands