40 en | Programming
Carephone 52+
F.01U.031.884 V4 | 2009.03
Operating Manual
Bosch Security Systems
75
Individual Pincode
The Carephone 52+ is delivered with the factory setting
246810 for the PIN code. It is recommended not to change
this code. If you need to change this code, please take care to
write it down to find it easily.
77
Pre-alarm time
The pre-alarm time of the Carephone 52+ can be programmed
in steps of 10 seconds. This is the time within which an emer-
gency call that has been initiated can still be stopped. Select
a setting between 0 and 6.
0 = Off.
81-89 & 80
Assigning radio buttons
The registered radio buttons can be programmed to trigger
different alarm functions, e.g. a fire alarm.
1.
First, register the radio buttons on the Carephone 52+;
refer to programming steps 90-99.
2.
To assign a function to radio button 91, select program-
ming step 81.
3.
Select a function:
X
0 = radio transmission activation
X
1 = emergency call button
X
2 = activity monitor reset button
X
3 = sign in/sign out
X
4 = service call
X
5 = input
X
6 = ext. activity monitor reset button
X
7 = connect with individual call number
X
8 = output
X
9 = fire
X
B = motion
4.
Press C to confirm.
The unit goes to programming step 82. You can now proceed
to program the function of radio button 92, and so on.
NOTICE! After programming step 89 the unit goes to
programming step 80.
Table 12.2
Summary of Contents for Carephone 52+
