26 en | Installation
Carephone 52+
F.01U.031.884 V4 | 2009.03
Operating Manual
Bosch Security Systems
11.3
Connection configuration
To check whether an emergency call can be sent,
1.
Make a phone call in the normal way.
2.
While the call is in progress, press the emergency call
button to initiate an emergency call.
If the unit has been correctly installed the phone call will be
automatically disconnected.
3.
The test call described above should be made each time
the unit is reinstalled.
The unit can now be programmed as described in Section 12.
11.4
De-installation
To switch off the Carephone 52+ you must remove the power
plug from the unit. This also shuts down the battery.
NOTICE! If you remove the power plug from your power outlet,
the unit will announce a power failure. The unit will
automatically switch over to battery operation.
i
NOTICE! In the event of an emergency, the unit must be able to
send out an emergency call even if a phone call is in progress at the
time. The Carephone 52+ must interrupt the phone call in order to
do this.
!
CAUTION! With a private branch exchange (PABX) there is no
guarantee that an ongoing conversation will be automatically
interrupted by the emergency call. For more information please
contact your PABX supplier.
Summary of Contents for Carephone 52+
