Bosch BULLS 650-185, Operating Instructions Manual

Page: 143 / 238

142
Cleaning and servicing
7.4.3 Pannier rack
1 Dry pannier rack with a cloth.
2 Spray pannier rack with spray wax and leave to
dry.
3 Wipe pannier rack with a cloth.
4 Protect chafing points on panniers with
adhesive film. Replace worn adhesive film.
5 Care for coil springs with silicone spray or wax
spray from time to time.
7.4.4
Fenders
 Depending on the requirements for the
material in the
fender
, apply hard wax polish,
metal polish or a plastic care product as per the
product instructions.
7.4.5 Servicing the kickstand
1 Dry kickstand with a cloth.
2 Spray kickstand rack with spray wax and leave
to dry.
3 Wipe down kickstand with a cloth.
4 Lubricate the kickstand joints with spray oil.
7.4.6 Stem
1 Spray painted and polished metal surfaces
with wax spray and leave to dry.
2 Wipe away any wax residue with a cloth.
3 Apply silicone or Teflon oil to the stem shaft
tube and the quick release lever pivot point
with a cloth.
4 If you have a Speedlifter Twist, also apply oil to
the unlocking bolt groove in the Speedlifter
body.
5 Apply a little acid-free lubricant grease
between the stem quick release lever and the
sliding piece to reduce the quick release lever
operating force.
6 If you have a stem with a cone clamp, apply a
new protective layer of assembly paste onto
the stem and fork steerer contact point once a
year.
7.4.7 Handlebars
1 Spray painted and polished metal surfaces
with wax spray and leave to dry.
2 Wipe away any wax residue with a cloth.
7.4.8 Hand
Grips
7.4.8.1 Rubber hand
grips
1 Apply talcum powder to sticky rubber
hand
grips
.
7.4.8.2 Leather hand
grips
Standard leather care products keep leather
smooth and resistant, brighten its appearance and
improve or replace stain protection.
1 Try leather care product out on a less visible
spot before use.
2 Care for leather
hand grips
with a leather
care product.
Notice

Never apply talcum powder to leather or foam
hand grips
.