Bosch BULLS 650-185, Operating Instructions Manual

Page: 70 / 238

69
Assembly
5.3.4 Fitting the pedals
The pedals have two different threads to ensure
they don’t come loose while the rider is pedalling.
• The pedal on the left facing the direction of travel
has a left-hand thread and is marked L.
• The pedal on the right facing the direction of travel
has a right-hand thread and is marked R.
The mark is either on the top end, the axle or the
pedal body.
Figure 66: Example of markings on pedals
1 Coat threads in both pedals with waterproof
grease.
2 Turn the pedal marked L
counter
clockwise by
hand into the crank arm on the left as seen
when facing the direction of travel.
Figure 67: L-pedal in the left-hand crank arm
3 Turn the pedal marked R
counter
clockwise by
hand into the crank arm on the right as seen
when facing the direction of travel.
Figure 68: R-pedal in the right-hand crank arm
4 Use a 15 mm
wrench
to fasten the left-hand
pedal thread in a
counter
clockwise direction
and the right-hand pedal in a clockwise
direction with a torque between 33
Nm and
35 Nm.
L R
L
L
R