Bosch BULLS 650-185, Operating Instructions Manual

Page: 50 / 238

49
Description
3.4.3 Display
The display is controlled using the control panel.
Figure 41: BOSCH Kiox300 display
The following pages are on the display screen:
• START SCREEN – see section 3.4.8.1
• STATUS SCREEN – see section 3.4.8.3
• SETTINGS, see Section 3.4.8.5
3.4.3.1 START SCREEN
If no other page was selected before the last time
display was switched off, the START SCREEN
is displayed.
Figure 42: Overview of start screen
1 Unit of speed
2 Selected level of assistance indicator
3 Riding light symbol
4 Battery level indicator (display screen)
5 Title screen
6 Own power indicator
7 Motor power indicator
8 Speed indicator
Indicators 2 to 4 make up the status bar and are
displayed on every page.
1. Unit of speed
The unit of speed is displayed either in km/h or
mph.
2. Selected level of assistance indicator
The higher the selected level of assistance, the
more the drive system assists with pedalling.
eMTB mode is available for Performance Line CX
drives. In eMTB mode, the assistance factor and
the torque are dynamically adjusted depending on
the pedalling force applied to the pedals.
3. Riding light symbol
The riding light symbol is shown when the
riding light is on.
4. Battery level indicator (display screen)
If the on-board computer is removed from its
mount, the last battery level message is saved.
The battery level indicator (display screen) can be
viewed on the STATUS SCREEN and in the
status bar.
4
1
2
3
8
5
6
7
Level of assistance Use
OFF When the drive system is switched on,
the motor assistance is switched off.
The
ebike
can be used like a normal
bicycle by simply pedalling.
ECO Limited assistance with maximum effi-
ciency for maximum range
TOUR Constant assistance, for long-range
tours
e
MTB/SPORT
Powerful assistance, for sporty start-up,
optimal assistance on all types of ter-
rain
TURBO Maximum assistance up to high pedal-
ling frequencies, for sport riding
Table 15: Overview of levels of assistance