Bosch BULLS 650-185, Operating Instructions Manual

Page: 77 / 238

76
Operation
6.4 Instruction and customer service
The supplying specialist dealer will provide
customer service. Contact details can be found on
the
ebike
pass for these operating instructions.
The specialist dealer will explain all the
ebike
functions to the new owner in person, this being
when the specialist dealer hands over the
ebike
at
the latest. These operating instructions are
provided with every
ebike
, so that the rider can
consult them at a later stage.
The supplying specialist dealer will also perform
all maintenance, modifications and repairs in the
future.
6.5 Adjusting the
ebike
Only a correctly adjusted
ebike
will guarantee
the desired ride comfort and health-promoting
activity.
All settings must be re-configured if the body
weight or maximum baggage weight changes.
6.5.1 Preparing
The following tools are required to adjust
the
ebike
:
Crash caused by incorrectly adjusted torques
If a
bolt
is fastened too tightly, it may break. If a
bolt
is not fastened enough, it may loosen. This
will cause a crash with injuries.

Always observe the indicated torques on the
screw and in the operating instructions.
CAUTION
!
Tape measure
Scales
Spirit level
Combination wrench
8 mm, 9 mm, 10 mm, 13 mm, 14 mm and 15 mm
Torque wrench
Working range 5–40 Nm
Hex key
2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm and
8 mm
Phillips
screwdriver
Flat
head screwdriver
Table 31: Tools required for assembly