EN
© 2005 Bosch Security Systems
Page 28 of 40
Section 13
NOTE:
The following four (4)
CAMERA SETUP
options pertain to Day/Night models only, and will not appear on the screen
otherwise.
Night Mode
– Selects night mode (B/W) operation (Day/Night models only).
Choices:
. . . . . . . . . . . . . .On, Off, Auto.
Night Mode Threshold
– Adjusts the level of light at which the camera automatically switches to night mode (B/W)
operation (Day/Night models only).
Choices:
. . . . . . . . . . . . . .Sliding Scale from 10 to 55 (in increments of five).
Night Mode Color
– Determines if color processing remains in effect while in night mode (Day/Night models only).
Choices:
On . . . . . . . . . . . . . . . . . .Color burst remains in video signal. Picture has a greenish shade of B/W.
*Off . . . . . . . . . . . . . . . . . . . .Video is true B/W without color burst in video signal.
QuickSet Mode
– Selects one of several modes where camera settings are set according to the preceding AUTODOME
LOCKED COMMANDS chart in SECTION 12 (Day/Night models only).
LENS SETUP
(See FIGURE 13B for
LENS SETUP
menu hierarchy).
Auto Focus
– AutoDome automatically focuses on the subject in the center of the screen. The Factory Default setting is
SPOT.
Choices:
Constant . . . . . . . . . . . . .Auto Focus is always active, even while moving.
Manual . . . . . . . . . . . . . . . . .Auto Focus is inactive; manual focus must be used.
*
Spot . . . . . . . . . . . . . . . . .Auto Focus activates after the camera stops movement. Once focused, Auto Focus is inactive
until the camera is moved again.
Auto Iris
– AutoDome automatically adjusts to varying light conditions. The Factory Default setting is CONSTANT.
Choices:
*Constant . . . . . . . . . . . . .Auto Iris is constantly active.
Manual . . . . . . . . . . . . . .Iris must be manually adjusted.
Auto Iris Level
– Reduces the camera’s Iris reference level for proper exposure.
Choices:
. . . . . . . . . . . . . .Sliding scale from – (reduce brightness) to + (increase brightness).
Focus Speed
– Adjusts the manual focus speed. The Factory Default setting is two.
Choices:
. . . . . . . . . . . . . .Sliding Scale from 1 (normal) to 8 (fast).
Iris Speed
– Adjusts the manual iris speed. The Factory Default setting is five.
Choices:
. . . . . . . . . . . . . .Sliding Scale from 1 (normal) to 10 (fast).
Max Zoom Speed
– Adjusts the manual zoom speed. The Factory Default setting is FAST.
Choices:
. . . . . . . . . . . . . .Fast*, Medium, and Slow.
Digital Zoom
– Enables digital zoom. The Factory Default setting is ON.
Choices:
*On . . . . . . . . . . . . . . . . . .When the camera reaches maximum optical zoom, the image is electronically zoomed (up to 12X).
Off . . . . . . . . . . . . . . . . . .When the camera reaches maximum optical zoom, it does not electronically zoom.
Restore Defaults
– Restores ALL of the choices, for this submenu ONLY, back to the Factory Defaults.
Choices:
. . . . . . . . . . . . . .Yes, No.
