EN
© 2005 Bosch Security Systems
Page 37 of 40
ON-SCREEN PROGRAMMING
The AutoDome software offers user-friendly, on-screen pro-
gramming. A few common commands are shown below.
Additional commands are listed at the end of this manual.
Saving a scene (Preset)
The AutoDome allows up to 99 scenes to be saved and recalled
instantly. A saved scene is called a Preset. When a Preset is saved,
the position, zoom, and most camera settings are stored.
Figure 1 Preset menu
SET-100-ENTER displays the
Preset
menu (see FIGURE 1). Menu
options are store, delete, name, or edit. Up to 99 scenes can be
saved, and the system automatically selects the next available
number. When a Preset is saved, it can be named via the joystick,
FOCUS, and IRIS (see FIGURE 2). The name can be up to
16 characters long. This Preset can later be viewed using the
SHOT-#-ENTER command, where # is 1-99.
Figure 2 Naming a scene (Preset)
Preset Tour
Once Presets are stored, the AutoDome can cycle through all Presets
or selected Presets. This is called a Preset tour. To include or remove
presets on a tour, type SET-900-ENTER. This displays the current
Presets, and indicates if they are on the tour. Follow the on-screen
instructions to include/remove Presets from the tour.
Note:
Presets removed from the tour can still be accessed
manually).
Type ON-8-ENTER to activate the preset tour. To change the time
duration between presets, type ON-15-ENTER and follow the on-
screen instructions.
Figure 3 Preset tour menu
Setting the Preset Tour period
To change the time duration between presets in a Preset Tour, type
ON-15-ENTER, and use the joystick for adjustments
(see FIGURE 4).
Figure 4 Preset tour period adjustments
User Manual
