EN
© 2005 Bosch Security Systems
Page 14 of 40
c. There is a visual confirmation that the address was cleared.
Use ON-997-ENTER to check/confirm camera addresses.
For example, if referring to Camera 3, press
CAMERA-3-ENTER, then ON-997-ENTER. This causes all
cameras to briefly display their addresses.
FastAddress is stored to nonvolatile memory, thus will not change
if power is removed or factory defaults are restored
(SET-899-ENTER).
Figure 3A Enter new address
Figure 3B Clearing address
SECTION 4
AutoDome SECURITY
The AutoDome has password protection capability for
Advanced Menu access and other locked commands.
To set a password, after entering OFF-90-ENTER, enter
SET-802-ENTER and follow the on-screen instructions to set or
change the password. Passwords are four (4) digits in length and
are selected via the joystick.
The AutoDome's default password of 0000 <four zeros> allows
OFF-90-ENTER to directly unlock the Advanced Menu
commands. If the password of 9999 is used, the AutoDome is
totally unlocked so that all AutoDome commands can be
executed (no OFF-90-ENTER is required to use ADVANCED
COMMANDS).
If any other 4-digit password is set, the AutoDome prompts for
entry of a password when the unlock command,
OFF-90-ENTER, is entered.
Section 4
