30
SM_151815_rev00
Service Manual DEVILLE 35 since year 2017
22
24
23
Put back the customer settings on the red knobs by unscrewing and counting the
clicks.
Tool(s) required :
-
n/a (by hand)
Screw the platform adjustment with two screws.
Locate the hole on the shaft, then place the black knob( high speed ) on the fork
with the screw in front of the hole
Gently screw the knob with 1.3mm HEX wrench. Turn the knob until you feel that
the screw fall in the hole.
Tighten the screw
Screw the grey knob (low speed) on the fork with 2mm HEX wrench.
Tool(s) required :
-
1.3mm HEX wrench
-
2mm HEX wrench
No torque – tighten to contact
Put back the customer settings on the knobs by unscrewing and counting the
clicks.
Tool(s) required :
-
By hand
1
2
3