29
SM_151815_rev00
Service Manual DEVILLE 35 since year 2017
19
21
20
Rotate the fork upside down.
Screw the oil cartridge nut with the torque wrench.
Tool(s) required :
-
Torque wrench
-
21mm socket
Torque = 10Nm
Put O-ring in the groove at the end of the shaft
Use the magnet to put ball and in the hole with grease.
Tool(s) required :
-
Magnet
Put complete oil cartridge inside the casting.
Locate the hole on the shaft, then place the red knob rebound on the fork with the
screw in front of the hole
Gently screw the knob. Turn the knob until you feel that the screw fall in the hole.
Tighten the screw.
Tool(s) required :
-
1,5mm HEX wrench
No torque – tighten gently
2
1