24
SM_151815_rev00
Service Manual DEVILLE 35 since year 2017
4
5
6
Insert the air shaft inside the left stanchion, greased piston first.
Firmly push by hand on the second piston.
You should feel that the piston went through a “click”.
Check if you see the groove in the stanchion to place the retaining ring.
Tool(s) required :
-
n/a (by hand)
Take a new retaining ring.
Place the tips of the large internal retaining ring pliers into the eyelets of the
retaining ring.
Tool(s) required :
-
Large retaining ring pliers
Press firmly the pliers and insert one side of the retaining ring.
Push the other side inside the groove, if necessary, you could use a small
screwdriver.
Rotate the retaining ring in its groove to ensure that the retaining ring is properly
seated inside the groove.
Use special tool to verify that the retaining ring is in correct position inside the
groove.
Screw the screw between the eyelets of the retaining ring
Tool(s) required :
-
Large retaining ring pliers
-
Small screwdriver
-
Verify retaining ring tools / ref. 151815-O-014
-
2.5 HEX wrench
CAUTION
Do not use tools to push the pistons, only by hand!
1
CAUTION
Sharp edges of the retaining ring should face up once mounted!
1
2
2
Sharp edges
facing the pliers
1