background image

1

11

11

Owner's Manual

Owner's Manual

Owner's Manual

Owner's Manual

Owner's Manual

R32ETR & R32ETS

R32ETR & R32ETS

R32ETR & R32ETS

R32ETR & R32ETS

R32ETR & R32ETS

Ad

Ad

Ad

Ad

Advvvvvanced 

anced 

anced 

anced 

anced  TTTTTrrrrranspor

anspor

anspor

anspor

ansporta

ta

ta

ta

tation Pr

tion Pr

tion Pr

tion Pr

tion Products

oducts

oducts

oducts

oducts,,,,, Inc

 Inc

 Inc

 Inc

 Inc.....

6304  215th St SW,  Mountlake Terrace, WA  98043

Toll Free: 877-433-4273  Fax: 425-673-4668

E-Mail: [email protected]

Web: www.visionrecumbents.com

24

24

24

24

24

The Advanced Transportation Products Inc. Warranty

Advanced Transportation Products Inc. warrants each new VISION bicycle

frame, fork, and seat frame against defects in workmanship and materials for the life-
time of the original owner.  Paint and decals, seat fabric, and all original parts, are
warranted for a period of one year from the date of purchase.  This warranty is expresssly
limited to the repair or replacement of a defective frame, fork, seat or defective parts
and is the sole remedy of the warranty. This warranty applies to the original owner and
is not transferable.

Claims under this warranty are to be made through an authorized VISION

dealer.  Proof of purchase is required.  A Warranty Registration Card must be com-
pleted and received by Advanced Transportation Products Inc. before warranty claims
may be processed.

The warranty does not cover normal wear and tear, improper assembly or

maintenance, or installation of parts or accessories not originally intended or compat-
ible with the bicycle as sold.

The warranty does not apply to damage or failure due to accident, abuse or

neglect.

Advanced Transportation Products Inc.  shall not be responsible for inciden-

tal or consequential damages.  Labor  charges for part changeovers is not covered by
this warranty.  The user assumes the risk of any personal injury or damage to the bi-
cycle or other losses if the bicycle is used in any competitive event including but not
limited to bicycle racing, triathalons, or similar activities.

Quic

Quic

Quic

Quic

Quick Inf

k Inf

k Inf

k Inf

k Infor

or

or

or

orma

ma

ma

ma

mation

tion

tion

tion

tion

Tire & Wheel information

Rear:

R32: 406 bead seat diameter, 1"-1.75" (ex 20 x 1.35")

Front:

R32: 406 bead seat diameter, 1"-1.75" (ex 20 x 1.35")

Inflation pressures

: Inflate to the pressure moulded on tire

sidewall

Torque specifications

Handlebar Extension: 65 in-lbs  (6 N-M)
Handlebar Stem: 65 in-lbs  (6 N-M)

Chain

3x7 Hub, Standard Frame = 205 Links

Serial number location

Stamped on the back plate, at the end of the main frame.

©  Copyright 1999 ATP Inc. All rights reserved. Do not copy or reproduce.

Summary of Contents for R32ETR













Reviews: