BONFIGLIOLI Vectron AEC 401 Series Operating Instructions Manual Download

Page: 20 / 90

Operating Instructions AEC

11/17

Storage and transport

NOTICE

Draining the heat sink

Liquid cooled devices may be transported and stored only with the heat sink completely
drained of the coolant.



Use compressed air to drain the heat sink radiator.

4.1

Storage

NOTE

Damage caused by incorrect storage
Wrong or inappropriate storage may result in damage, e.g. due to moisture and dirt.



The frequency inverters must be stored in an appropriate way. During storage, the
devices must remain in their original packaging.



The units may only be stored in dry rooms which are protected against dust and
moisture and are exposed to small temperature deviations only.



The requirements of DIN EN 60721-3-1 for storage, DIN EN 60721-3-2 for transport
and labeling on the packaging must be met.



The duration of storage without connection to the permissible nominal voltage may

not exceed one year. After one year of storage, connect the device to mains
voltage for 60 minutes.

Summary of Contents for AEC 401 Series



























































































Search results

Summary of Contents for AEC 401 Series

Reviews:

Related manuals for AEC 401 Series

Brands by name

Popular brands

BONFIGLIOLI Vectron AEC 401 Series, Operating Instructions Manual

Search results

Summary of Contents for AEC 401 Series

Reviews:

Related manuals for AEC 401 Series

Brands by name

Popular brands