21
The device has two wireless transmission modules built in. Users can choose one or two wireless
transmission modules according to their needs to connect with the corresponding products.
The device plus's built-in wireless transmission module connection mode: one mode is that an apex
locator with the same type of wireless transmission module can be wirelessly connected with the device,
and the information of the device’ s work can be reflected on its large screen (the wireless transmission
module of the device o and the apex locator need to be opened simultaneously); the other one mode is
that a wireless pedal control device with the same type of wireless transmission module can be wirelessly
connected with the device. The device can be operated, stopped, turned forward and reversed by the
device. (See the pedal instructions for the operation of connecting with the wireless pedal control device.)
Two wireless transmission modules, users can choose one or two products to connect with it freely.
The device wireless transmission uses Bluetooth transmission technology to meet the
requirements of various radiation indicators.
Transmission distance is not more than 5 meters.
Display information is transmitted in milliseconds to avoid the delay problem.
The device wireless transmission connection settings:
Wireless transmission display features on and off. Long press “S” key to enter into other
operation mode, short press “S” until the Bluetooth icon shows, press“+/-” to select “Bluetooth
turn on” or “Bluetooth turn off”.
When Bluetooth turn on, the Bluetooth icon shows, when connected, the display as follows:
Bluetooth off
Bluetooth on
Bluetooth connected
CAUTION:
This wireless transmission module is one-to-one connection and does not support one-to-many
connection, that is, one module can only connect with one product.
When multiple devices automatically connected at the same time, there may be a connection
error. Please connect one by one as required
Wireless transmission function automatically save once start, factory setting this function is
off.
4.5.5 Factory Default Parameters
The program can be restored to factory default settings, if setup is in confusion.
Long press “S” to enter other operation mode, short press “S” key until it turns into “Recovery
Factory Settings”. Then select yes by pr/-”, counting from"9" to "0", turn off and
RESTART the device to complete the Factory settings.
