19
Optimum Torque Reverse: Rotation is
in Reciprocating motion.
NOTICE:
To set the reciprocating of rotation direction see 4.5.3 OTR Settings
4.3.2 Rotation Mode setting
Pressing this SELECT Key to adjust rotation mode in the select box, when the machine is on.
Enter the Rotation Mode selection: To adjust the rotation mode of Forward (AUTO
REVERSE)—REVERSE—Optimum Torque Rotation (RECEPROCATING), in sequence by
“+/-” key.
To press “P” key to exit, and all the settings will be saved automatically.
4.4 Speed, Torque Settings
Start setting: When the machine is on.
Speed: To Press “+/-”key to adjust the speed;
Torque: To press “S” then to adjust the current torque in the select box by “+/-”key;
To press “P” key to exit, and all the settings will be saved automatically.
Load lower than the set torque limit
value, clockwise and anticlockwise in
turns (reciprocating)
Load higher than the set torque limit value
，
motor will
exit the root canal automatically, The exiting direction is
opposite to the direction of reciprocating cutting.
or
