FLIGHT INSTRUMENTS
Volume 2
Flight Crew Operating Manual
Dec 05/2006
11-01-28
CSP 100-6
REV 7
DISPLAY CONTROL PANEL (DCP)
DESCRIPTION
The display control panel (DCP) controls the information displayed on the PFD and controls the radio functions on the
MFD.
COMPONENTS AND OPERATION
The following is a brief description of the DCP control knobs, switches, and push buttons:
1/2
The 1/2 button selects and deselects the cross-side radio menu on the MFD. When a radio submenu is in view,
the equivalent cross-side radio submenu is selected/deselected, when the RADIO button is pushed.
DME/H (DME HOLD)
The DME H button selects and deselects the DME hold function. When DME hold is selected, the DME holds the current
NAV frequency while allowing the VOR radio to be independently tuned.
NAVSRC (NAVIGATION SOURCE)
The NAV SRC button enables the display of a list of NAV sources on the PFD with the next NAV Source selected. Repeated
pushes of the NAV SRC button select the next listed NAV source as the new active NAV source. The NAV source list au-
tomatically times out.
FRMT (FORMAT)
The FRMT button directly selects the current PFD display format between present position (PPOS) and compass rose
(ROSE).
TFC (TRAFFIC)
The TCAS is overlaid on the PFDs compass rose or map mode display by momentarily depressing the DCP TFC button.
When there is not an active RA or TA, the range is the last active TCAS range A second momentary press of the TFC button
removes the TCAS overlay. Continuously pressing TFC for more than 1 second selects the compass rose/TCAS format
with the range set to the default 10 mi full range. Radar or terrain overlays, if previously displayed, are removed.
TR/WX (TERRAIN/WEATHER/LIGHTING)
The TR/WX button is a multiple mode selection button that selects and deselects the display of terrain, weather, and light-
ning (if installed) on the PFD. The first push of the TR/WX button selects a new state in the TR/WX list. The PFD auto-
matically changes the range to an appropriate range if required. Pushing the TR/WX button again moves the cursor to the
next available state. If the TAWS declares a terrain awareness warning or caution, pressing the TR/WX button causes an
immediate response, regardless of the current format. The first momentary press of the TR/WX button selects terrain for
display at its default 10 nm range and PPOS format.
TUNE
The tune knob is a rotary control used for MFD radio tuning. The larger and smaller knobs change the most significant and
least significant digits of the frequency respectively. The up down arrow button in the center of the TUNE knob swaps the
recall and the active frequencies.
1/2
DME/H
NAVSRC
RADIO
BRGSRC
FRMT
TFC
TR/WX
REFS
RADAR
TUNE
MENU
DATA
TILT
RANGE
C
F
O11
0
1
002
_00
7
S
U
P
H
AUTO
T
L
I
T
S
U
P
H
T
C
E
L
E
S
Summary of Contents for BD-100-1A10
