BOMBARDIER BD-100-1A10, Operating Manual

Page: 199 / 544

COMMUNICATIONS
Sep 13/2004 Flight Crew Operating Manual Volume 2
REV 1 CSP 100-6
06-01-07
VHF COMMUNICATION (Cont)
DISPLAY CONTROL PANEL COM RADIO OPERATION
The radio menu provides basic COM radio tuning control. The COM submenu provides control display for other COM
radio operation. Each COM radio installed on the aircraft has its own submenu. The active frequency, recall frequency, and
squelch status displays are identical to the display on the radio menu.
The current control location is indicated by a cyan control box. The default location is the last tuned communication radio
(VHF or HF). After 20 seconds of inactivity, the cyan control box returns to the default location.
Selecting the 1/2 button results in the cross side radios being displayed and the radio legends being displayed in yellow.
.
- Push the RADIO button on the DCP to show the radio menu on the MFD if another menu/list is active
- Turn the MENU knob on the DCP to move the selection box to the desired radio (COM 1, COM 2, COM 3 if
installed) display on the radio menu.
- Push the RADIO button on the DCP to show the appropriate submenu on the MFD
- The following operations are performed on the submenu
- Change the SQUELCH mode
- Turn the MENU knob to move the selection box to the SQUELCH control.
- Turn the DATA knob or push the PUSH SELECT button to select the squelch ON or OFF
- Change the frequency spacing for radio tuning
- Turn to MENU knob to move the selection box to the FREQ SEL control.
- Turn the DATA knob or push the PUSH SELECT button to select 8.33 or 25 kHz spacing for tuning
- Select the COM TEST mode
- Turn the MENU knob to move the selection box to the TEST control.
- Turn the DATA knob or push the PUSH SELECT button to select the TEST mode
- Change the COM 3 mode (only if Voice/Data option is enabled)
- Turn the MENU knob to move the selection box to the COM 3 MODE control.
- Turn the DATA knob or push the PUSH SELECT button to select the VOICE or DATA mode. When
DATA mode is selected, the squelch annunciation, squelch status, transfer arrow, frequency selections
8.33 and 25, and TEST selection do not show on the COM 3 CONTROL menu
1/2 DME/H NAVSRC
RADIO BRGSRC
FRMT TFC TR/WX
REFS RADAR
TUNE
MENU DATA
TILT
RANGE
S
U
P
H
AUTO
T
L I
T
S
U
P
H
T
C
E L
E
S
COM1 NAV1 ATC1/TCAS ADF1
HF1
COM3
COM2
118.000 108.00 7777 1799.5
118.000 118.000
118.000 118.000 2.0000 190.0 108.00 118.000
STBY
ABV
TX
2.0000 AM
REV 1