BOMANN GSPE 885, Instruction Manual

Page: 16 / 24

16
NOTE NOTE NOTE NOTE::::
*EN 50242: this program is the test program and of combined energy and water consumption most efficient.
The information for comparability:
Capacity: 9 settings; Position of the upper basket: lower position; rinse aid setting: 6
Control panel
Control panel Control panel
Control panel
1111 POWER: button to turn on/off the power supply. The control lamp indicates the power supply.
2222 VORWAHL (Delay): by repeatedly pressing the button, the program start can be delayed by 3, 6 or
9 hours. The control lamps indicate the selection. Press the START/PAUSE button and the appliance
starts automatically after the selected time delay has expired.
3333 START/PAUSE: button to start/pause the selected or running program.
Program control lamp is lighting: Operation
Program control lamp is flashing: Pause
4444 Control lamp: lights up when rinse aid must be added.
5555 Control lamp: lights up, when dishwasher salt needs refilling.
6666 Child safety lock: to activate / deactivate press the button combination for a few seconds. All buttons, ex-
cept the POWER button are locked for operation. The corresponding program control lamps indicate the
activation.
7777 Programs: buttons to select the rinse program. The program control lamps indicate the selection.
Starting a Starting a Starting a Starting a rinse rinse rinse rinse program program program program
•
The water supply must be opened up to the maximum pressure.
•
Load the dishwasher baskets.
•
Fill in the detergent.
•
Turn on the appliance.
•
Set the required program options.
•
Start the operation.
Program change
Program change Program change
Program change
CAUTION:
CAUTION: CAUTION:
CAUTION:
A program change should be done only a short time after starting the program. Otherwise, maybe detergent
has been released and already drained rinse water.
•
To do a program change, turn the unit off and on again.
•
Select a new program and start the new operation.