17
Forgot to add a dish?
Forgot to add a dish?
Forgot to add a dish?
Forgot to add a dish?
WARNING:
WARNING:
WARNING:
WARNING:
Open the door very carefully during operation, there is a risk of water squirting out.
Dishware can be added any time before the detergent dispenser opens.
•
Press the START/PAUSE button to stop the operation. Once the spray arms have stopped, you can fully
open the appliance door.
•
Add forgotten dishware.
•
Press the START/PAUSE button, the operation will continue after approx. 10 seconds.
At the e
At the e
At the e
At the end of program
nd of program
nd of program
nd of program
CAUT
CAUT
CAUT
CAUTION:
ION:
ION:
ION:
Allow the appliance to cool down a bit after the program has ended, before you open it. This avoids that steam
escapes that causing long-term damages to your furniture.
At the end of the rinse cycle will sound a series of signals; then the unit goes into standby mode.
Turn
Turn
Turn
Turn off
off
off
off
•
Turn off the appliance.
•
Close the water supply, if necessary!
•
Remove the dishes after cooling (see "Unloading the dishwasher baskets").
•
Leave the appliance door slightly open until the next rinse cycle to avoid odors.
•
If the appliance is not in use for an extended period, disconnect it from the power supply!
Unloading the dishwasher baskets
Unloading the dishwasher baskets
Unloading the dishwasher baskets
Unloading the dishwasher baskets
CAUTION
CAUTION
CAUTION
CAUTION::::
Let the dishware cool down for about 15 minutes before unloading. Hot dishes are sensitive to knocks.
NOTE
NOTE
NOTE
NOTE::::
At the end of program there could be still water drops inside the appliance.
•
Open the appliance door and pull out the basket.
•
To avoid water dripping from the upper basket onto the dishes in the lower basket, it is advisable to unload
the appliance from the bottom up.
E
EE
Energy saving tips
nergy saving tips
nergy saving tips
nergy saving tips
•
Always try to operate the dishwasher when it is fully loaded.
•
Do not rinse the dishes in advance under running water.
•
Use for each type of load the most appropriate rinse program.
•
Do not perform a pre-rinse (depending on model), if not absolutely necessary.
Summary of Contents for GSPE 885
Page 23: ...23...